home Future Students Current Students Faculty and Staff Business and Community Online Courses
 
Canon RE-450X

CannonRE-450X Visual Presenter Power Select Source Source Instructions

Resources

 

 

Canon RE-450X  Equipment Manual

The Canon Video Visualizer RE-450X features razor sharp XGA resolution, advanced automatic exposure and zoom control, and a powerful 12X zoom. The RE-450X gives educators the ability to display high resolution images.

Product Features

  • VGA Input/Output
  • Image Freeze
  • RS-232C Controllable
  • Built-in Backlight
  • Paper Size Preset
  • Text Enhancement Function

Troubleshooting

Powering On

The unit takes about 5 seconds to show an image after you turn on the power. (If you turn it off, wait 5 seconds before powering it back up. The manual says it could cause a malfunction if you turn it off and on without waiting.)

The document camera must be turned on to show the computer on the projector.

Image Source

The computer is wired into the document camera. You will select which source depending on the “input select” button on the document camera. You must have “Comp1” or “Comp2” selected on the projector remote.
With the Epson 811 (ceiling mounted projector with a silver case)
Select “Comp2” on the Epson projector remote control.
With the Epson 5300 (ceiling mounted projector with dark grey case)
Select “Comp2” on the Epson projector remote control.
With the Epson 5350 (ceiling mounted projector with dark grey case)
Select “Comp2” on the Epson projector remote control.

Video

The VCR is wired directly to the projector. To show a videotape, select “Video” on the Epson remote control. The VCR does not go to the new document camera. If you use the laserdisc, you must turn on the VCR and then select “Video” on the Epson remote control.

Cannot get PPT Presentation to project

The projected image says, “no signal.”

If the room has a Canon RE-450X visual presenter (document camera)  and an Epson 811 projector, press "COMP2" on the remote control.

If the room has a Canon RE-450X visual presenter (document camera)  and an Epson 5300 projector, press "COMP1" on the remote control.

If the room has a Canon RE-450X visual presenter (document camera)  and an Epson 5350 projector, press "COMP1" on the remote control.

The computer is not working

Monitor says, “power save mode.”
If the room has a Canon RE-450X visual presenter (document camera) turn it on to use the computer

 
 
 
Contact Us